User Information and Precautions
||Quantity Per Case
For protection, always wear solvent resistant gloves, safety glasses and protective clothing when working with chemistry. Read complete user, safety precautions and disposal information on product container and product SDS before using.
Surface Cleaning: For light urethane surface residue or over-spray, brush or wipe with a clean cloth or towel a small amount of liquid over area and gently wipe until residue is removed. Depending on the amount of residue, let the liquid soak and work until residue is loosened and can be wiped away. Rinse surface with water and dry with a clean cloth or towel.
For dispenser parts cleaning, immerse parts in liquid and soak until residue is loosened and can be wiped away. Rinse parts with water and dry.
For faster cleaning action, mild warming of the liquid up to 150˚F will produce better results. Use an NFPA approved warming device when heating liquid. When warmed, this product is highly effective for removal of industrial epoxies and adhesives.
May be used on the following materials:
Steel, polypropylene, polyethylene, nylon, teflon, butyl/silicon rubber, melamine
Materials and surfaces to avoid:
PVC, lexan, polyester, polyurethane, EDP, PET, ABS, most painted surfaces
Flash point: 103° F
V.O.C. (lbs/gal): 6.61
Vapor Pressure (mmHg@68˚F) >1
Specific Gravity: .80
Water Solubility: No
Appearance and Color: Light Viscous Liquid
||HMIS III Rating
Index: 0 = No Hazard, 1 = Minimal, 2 = Moderate, 3 = High, 4 = Extreme
A – Glasses, B – Glasses/gloves, G – Vapor Respirator,/goggles,/gloves