||Quantity Per Case
||32 oz. Bottle w/ Leak-Proof Sprayer
||32 oz. Bottle Only
Always wear protective gloves, safety glasses and protective clothing when working with chemistry. Use only for industrial applications and only according to directions. Read SDS sheet before using product.
Board/Plastic Substrate Prep: Apply a small amount of S1000 solution on a clean paper towel or cloth and gently wipe over surface until marks and contaminates are gone. Next, wipe over area with a clean, dry towel until surface is dry and ready for printing.
Adhesive Labels/Decals/Tape Removal: Spray or apply with a clean paper towel or cloth over material to be removed. Allow S1000 solution to work for 15-20 seconds then begin peeling and removing the material from the surface as the adhesive dissolves. Wipe away remaining residue with a clean paper towel or cloth until surface is clean.
Flash point: 107° F
V.O.C(lbs/gal): 6.70Vapor Pressure (mmHg@68˚F) > 1
Specific Gravity: < 1
Water Solubility: Negligible
Appearance and Color: Crystal Clear Liquid
||HMIS III Rating
Index: 0 = No Hazard, 1 = Minimal, 2 = Moderate, 3 = High, 4 = Extreme
A – Glasses, B – Glasses/gloves, G – Vapor Respirator,/goggles,/gloves