SATA100

A fountain solution additive for use on web or sheet-fed presses to eliminate gap or lead edge toning and emulsification.
This unique product is a “printer’s savior” when challenged with ink/water balance problems!

Features and Benefits…
• Excellent fountain “wetting” agent allows lower water setting benefits
• Enables superior ink/water control while minimizing lead-edge tone
• See results of denser solids and color control without emuslification
• Formula has a strong affinity to coating of metal, silver and polyester plates providing protection and repair

SKU: SATA100-Q / SATA100-G / SATA100-P

Description

sata100
Item Number Container Quantity Per Case
SATA100-Q 1 Quart 6
SATA100-G 1 Gallon 4
SATA100-P 5 Gallon (2 – 2.5 Gallon Bottles) 1
User Information Always wear protective gloves, safety glasses and protective clothing when working with chemistry.  Use only for industrial applications and only according to directions. Read SDS sheet before using product. Directions Add SATA100 in increments of 1/4 oz (up to 3 oz) per gallon of working fountain solution until desired print results are achieved.  Contact INX Products Technical Support for assistance with “water wetting” or emulsification and toning issues. Specifications Flash point: >200° F V.O.C. (lbs/gal): 0.75(785 g/l) Vapor Pressure (mmHg@68˚F) >1 Specific Gravity: 1.01 pH: 6.5-6.9 Conductivity: n/aWater Solubility: Yes Appearance and Color: Crystal Clear Liquid
HMIS III Rating NFPA Rating
Health 1 1
Flammability 0 0
Reactivity 0 0
Personal Protection B
Index: 0 = No Hazard, 1 = Minimal, 2 = Moderate, 3 = High, 4 = Extreme A – Glasses, B – Glasses/gloves, G – Vapor Respirator,/goggles,/gloves

Reviews

There are no reviews yet.

Be the first to review “SATA100”