||Quantity Per Case
(2 – 2.5 Gallon Bottles)
Always wear protective gloves, safety glasses and protective clothing when working with chemistry. Use only for industrial applications and only according to directions. Read SDS sheet before using product.
Clean ink rollers and drain system water pans. Run press at clean-up speed and apply a small amount of MRC43 to the pan roller allowing solution to coat entire dampening system. Idle press for 30 seconds and wipe across entire length and circumference of top roller with damp sponge or lint-free press cloth until clean and contaminate free.
After rollers are clean, apply thin bead of MRC43 to top dampening system roller, idle press until solution is metered into a thin coating across entire dampening system rollers. Back the pressure off between rollers and shut press down allowing MRC43 to dry between shifts to maximize desensitization of dampening system rollers.
Flash point: >110° F
V.O.C. (lbs/gal): 2.80 (335 g/l)
Vapor Pressure (mmHg@68˚F) >1
Specific Gravity: 0.93
Water Solubility: Yes
Appearance and Color: Light Blue Liquid Emulsion
||HMIS III Rating
Index: 0 = No Hazard, 1 = Minimal, 2 = Moderate, 3 = High, 4 = Extreme
A – Glasses, B – Glasses/gloves, G – Vapor Respirator,/goggles,/gloves