ITE100

ITE100

A non-solvent based ink vehicle dispersion that will help reduce or eliminate offsetting and picking problems commonly associated with inconsistent ink tackiness and/or paper quality. Use ITE100 to increase ink mileage, plus aid ink setting during the initial drying stage.

Save pressroom time and money…Use ITE100 to solve multiple on-press issues!

Features and benefits…
• Enhances ink transfer without drastically or permanently affecting ink rheology
• Use to adjust ink tack and transfer at press side on multi-color presses
• Reduces migration on common blanket multi-color presses by reducing the ink tack of the second color down
• Enhances color solids and halftones while reducing picking and hickies
• Non solvent-based product and low VOCs <3 lbs/gal

SKU: ITE100-Q / ITE100-G / ITE100-P / ITE100-D Category:

Description

ite100
Item Number Container Quantity Per Case
ITE100-Q 1 Quart 6
ITE100-G 1 Gallon 4
ITE100-P 5 Gallon 1
ITE100-D 55 Gallon 1
User Information Always wear protective gloves, safety glasses and protective clothing when working with chemistry.  Use only for industrial applications and only according to directions. Read SDS sheet before using product. Directions Add ITE100 directly to ink on any sheet-fed, web press or letterpress ink as indicated below.  This product is a ready-to-use fine dispersion and needs no milling. Direct Modification of Bulk Ink: Add 1-4% ITE100 per pound of ink (level teaspoon is 1%/lb). Mix ink and ITE100 until ink is a smooth and soft mixture.  ITE100 To Reduce Picking Or Get An Ink Up To Color On Press: Add 1-4% ITE100 per pound of ink (level teaspoon is 1%/lb) directly to ink fountain. NOTE: There may be a delay of up to 50 sheets before the modified fountain ink transfers to paper. Immediate Inking Body/Viscosity Response: Place a small amount of ITE100 across top ink oscillator roller and allow press to run in for 15 seconds before dropping ink rollers. NOTE: This method is not as color accurate as allowing color to run through entire ink train. Specifications Flash point: >550° F V.O.C. (lbs/gal): 2.90 Vapor Pressure (mmHg@68˚F) <1 Specific Gravity: 0.92 pH: n/a Conductivity: n/a Water Solubility: No Appearance and Color: Light Yellow, Oily Liquid
HMIS III Rating NFPA Rating
Health 2 2
Flammability 2 2
Reactivity 0 0
Personal Protection B
Index: 0 = No Hazard, 1 = Minimal, 2 = Moderate, 3 = High, 4 = Extreme A – Glasses, B – Glasses/gloves, G – Vapor Respirator,/goggles,/gloves

Reviews

There are no reviews yet.

Be the first to review “ITE100”

Related products