||Quantity Per Case
Always wear protective gloves, safety glasses and protective clothing when working with chemistry. Use only for industrial applications and only according to directions. Read SDS sheet before using product. Use in a well ventilated area.
Always test solvent cleaners on an inconspicuous spot if working on a suspect surface.
Vehicle Surface Prep
Apply a small amount of solution on a damp, clean lint-free cloth and gently wipe over surface until marks and surface contaminates are gone. Next, wipe over cleaned surface with a clean, lint-free damp cloth and surface is ready for application or painting.
Apply solution on a clean lint-free cloth and wipe over the material to be removed. Let the solution work for a few seconds then begin peeling and removing the material from the surface as the adhesive dissolves. Wipe away remaining adhesive with a clean cloth.
Flash point: 45° F
V.O.C. (lbs/gal): 6.89
Vapor Pressure (mmHg@68˚F) 124.0
Specific Gravity: .83
Water Solubility: Negligible
Appearance and Color: Crystal Clear Liquid
||HMIS III Rating
Index: 0 = No Hazard, 1 = Minimal, 2 = Moderate, 3 = High, 4 = Extreme
A – Glasses, B – Glasses/gloves, G – Vapor Respirator,/goggles,/gloves