Description
| Item Number |
Container |
Quantity Per Case |
| NPSA100-B |
1 lb Container |
4 |
User Information
Always wear protective gloves, safety glasses and protective clothing when working with chemistry. Use only for industrial applications and only according to directions. Read SDS sheet before using product.
Directions
When used as directed, NPSA treated ink will not affect ink color. Catalytic drying effect requires 12 full hours for maximum results. Due to unique properties of print stocks, it is important to do a simple “tap out” test on a stock to ensure the treated ink drying result is achieved.
General Ink Blending Guidelines
NPSA100 should be added to inks at a ratio of 1-4% per pound of ink (1 level teaspoon of additive = 1%/lb) depending on the stock to be printed.
– Standard coated/uncoated stocks: 1%/lb
– Matte coated/board/tag stocks: 3%/lb
– Plastic/aqueous coated stocks: 4%/lb
Caution
NPSA treated ink cannot be left on press for extended periods or overnight. The ink will dry hard on rollers. Do not add NPSA100 treated ink back into stock ink can.
Specifications
Flash point: >105° F
V.O.C. (lbs/gal): 3.94
Vapor Pressure (mmHg@68˚F) >1
Specific Gravity: 1.02
pH: n/a
Conductivity: n/a
Water Solubility: No
Appearance and Color: Thick Brown Paste
|
HMIS III Rating |
NFPA Rating |
| Health |
2 |
2 |
| Flammability |
2 |
2 |
| Reactivity |
0 |
0 |
| Personal Protection |
B |
Index: 0 = No Hazard, 1 = Minimal, 2 = Moderate, 3 = High, 4 = Extreme
A – Glasses, B – Glasses/gloves, G – Vapor Respirator,/goggles,/gloves
Reviews
There are no reviews yet.